GB3HI
Torosay, Craignure, Isle of Mull
GB3HI - R4 (RV56) 145.700/145.100MHz 103.5Hz (G) CTCSS Access
Note 1750Hz toneburst will not work with this repeater
Repeater Keeper John, MM0JRM
The repeater is located at Torosay on the Isle of Mull,
approx 2 miles South West of the ferry terminal of Craignure, 12 miles WNW from
Oban, or 36 miles SW from Fort William.
The repeater was originally provided by
the Highlands and Islands Repeater Group, and was absorbed into this group in
1995.
It runs 10 watts into a 5dB heavy duty colinear approx 25 feet above
ground level instead of its former location on the TV mast.
Technical Information
Status - April 2008 - The duplexers were replaced on 12th April 2008 - This should solve the Rx problem that HI has had since January - Reports appreciated.(As of Summer 2025 there is an intermittemt fault on RX)
GB3HI - Specifications
RF Platform - Philips/Simco PRF10
Tx Power - 20W into duplexer
Duplexer -
Logic - G1SLE
Aerial - Radio Structures Collinear 3dBD
Feeder - RG214
Talk-thru time - 4 mins
Ident - ‘GB3HI G’ in morse
Access - 1750Hz for greater than 0.5 secs
but no greater than 4 secs or 103.5Hz CTCSS.
Coverage Details - RSGB ETCC Website
InfoGB3AY GB3CS GB3DG GB3FF GB3HI GB3KA GB3KV GB3LA GB3PA GB3SL GB3TC GB3WA GB7DA MB7VN MB7UKL GB3CSB